In your Lulea, you have access to various outlets: 230-volt sockets and USB ports. Please note that the 230-volt sockets can only be used when connected to shore power, and the USB ports on the center console may only work when the ignition is on in some vehicles.
To use the electrical system in the camper, you must first turn on the power at the display located to the right of the sliding door on the passenger side. This panel also allows you to check the current battery level and the fresh and grey water tank levels.
If you encounter issues with the power supply, check whether the RCD (Residual Current Device) switch located in the cabinet under the refrigerator and the battery switch are active.
If a specific function, such as lighting, is not working, it's worth checking the fuses in the fuse block. The fuses are labeled according to their function, which helps you quickly identify and resolve any issues*.
*Note:
To avoid damage to the vehicle’s electrical system, always turn off the ignition, lights, and all electrical devices, and remove the vehicle key from the ignition before replacing a fuse.
Replacing a fuse with a higher-rated one can cause damage elsewhere in the electrical system.
Opened fuse boxes must be protected from dirt and moisture. Dirt and moisture in the fuse boxes can cause damage to the electrical system.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article