In your Wales Bürstner Signeo, you have access to various power outlets. Please note that the 230-volt outlets can only be used when you are connected to shore power.
To use the electrical system in the camper, you must first turn on the power at the control panel located to the left of the entrance door. This panel also allows you to check the current battery level and the fresh and grey water tank levels. The top left indicator will light up when your camper is connected to shore power.
If you encounter issues with the power supply or shore power, check if the power switch located near the rear seat bench is turned on.
Additionally, ensure that the battery disconnect switch is active. This switch is located in the fuse box under the bed behind the wet room, under a cover. The battery disconnect switch is labeled "On/Off."
If a specific function in the camper, such as lighting, is not working, you may need to check a fuse.
The fuses are labeled according to their function, which helps you quickly identify and resolve any issues*.
*Note:
To avoid damage to the vehicle’s electrical system, always turn off the ignition, lights, and all electrical devices, and remove the vehicle key from the ignition before replacing a fuse.
Replacing a fuse with a higher-rated one can cause damage elsewhere in the electrical system.
Opened fuse boxes must be protected from dirt and moisture. Dirt and moisture in the fuse boxes can cause damage to the electrical system.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article