Here you will find instructions for operating the heater, as well as tips in case of a malfunction. The control display for the heater is located above the entrance door.
1. Turning on the Heater
Briefly press the rotary/push button to turn on the heater display.
The previously saved settings will be loaded automatically.
Make sure your diesel tank is at least 1/4 full. Additionally, your on-board battery must be sufficiently charged if you are not connected to shore power.
2. Setting the Room Temperature
Select the temperature icon from the menu bar.
Tap the rotary/push button to open the heater settings.
Rotate the button to select your desired temperature (you can choose between several preset modes, such as “Comfort” or “Eco”).
Confirm your selection by pressing the button again.
3. Turning off the Heater
Press the rotary/push button for more than 4 seconds.
After 2 seconds, "APP" will appear on the display, and after another 2 seconds, the display will switch to "OFF," and the heater will turn off.
4. Handling Error Codes
Activate the display by briefly pressing the rotary/push button. If there is a malfunction, an error code will be displayed.
Share the error code with us and feel free to contact us, so we can assist you in resolving the issue.
Once the issue is resolved, press the button to acknowledge the error. The heater will restart, which may take a few minutes.
If the error message reappears, the issue might not be fully resolved. Check the diesel and battery levels again, or see if a fuse may have tripped.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article