Here is a brief guide on how to operate the heater and what to do if an error occurs. The control panel for the heater is located above the entrance door to the living area.
Turning on the Heater
Make sure the gas bottle is open.
Briefly press the rotary push button to turn on the control panel.
The previously set values will be reactivated when the system is turned on.
Setting the Room Temperature
Select the temperature icon in the menu bar using the rotary push button.
Tap the rotary push button to enter the "Heater" settings.
Confirm your selection by tapping the rotary push button.
Turn the rotary push button to adjust the desired temperature.
Tap the rotary push button again to save the setting.
Turning off the Heater
Press and hold the rotary push button for more than 4 seconds.
After 2 seconds, "APP" will appear on the display, and after another 2 seconds, "OFF" will be displayed.
Handling Error Codes
Press the rotary push button to activate the display. If an error occurs, the display will show an error code.
Check the error code and inform us so we can provide the appropriate steps to resolve the issue.
Once the issue is resolved, tap the rotary push button to acknowledge the error and restart the device. The restart process will take a few minutes. If the issue is not resolved, the error message will reappear.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article